SKU: 2000-PB
Finish: Polished Brass
Material: Solid Brass
Repairs damaged doors
Assists in preventing forced entry
Dimensions: 1” x 4-1/2”
Door Thickness: 1-3/8”
$8.29
SKU:1848
Finish: Polished Brass
For flush or recessed doors
Bolt surface mounts to face of door
2 keepers allow for surface or mortise
frame installation
Guide brackets adjust fit unique
installation conditions
$4.99
SKU: 1532
Finish: Polished Brass
Material: Solid Brass
Rim mortise & surface strikes included
3 different keepers for special mounting
applications
For use on old style casement windows
Rim Strike Installation:
1. Place fastener in desired location and secure loosely with four screws.
2. Place rim strike in position to line up with fastener and install with two screws.
3. Check operation of fastener with strike and tighten all screws.
Mortise Strike Installation:
1. Place fastener in desired location and secure loosely with four screws.
2. Place mortise strike in position to line up with fastener. Mark position of screw holes, strike, and mortise hole using 3/16″ diameter drill and mortise 3/4″ deep recess. Install mortise strike with two screws.
3. Check operation of fastener with strike and tighten all screws.
Surface Strike Installation:
1. Place fastener in desired location and secure loosely with four screws.
2. Place surface strike in position to line up with two screws.
3. Check operation and tighten all screws.
$18.49
SKU: 1503
Finish: Polished Brass
Material: Solid Brass
For double-hung windows
Cam action draws windows together to
prevent drafts
Provides strong security barrier against intruders
$10.29
SKU: 1421
Finish: Polished Brass
Locks in closed or vented position
Locks & unlocks with key
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$9.89
SKU: 1419
Finish: Polished Brass
Uses special key for lock removal
Removal key is needed to unlock
Resists tampering if glass is broken
Recommended for wood windows only
Caution: Locks are designed primarily for use while occupants are away. If used with occupants present, proper precautions should be taken for fire escapes. Keep key readily available.
Instructions:
1. Close window.
2. Drill 5/8″ diameter. X 1/4″ deep in lower sash.
3. Drill 1/4″ diameter. 2″ deep.
4. Place bolt through cup washer and tighten.
5. Back out bolt until added security is needed.
$7.19
SKU: 1400
Finish: Polished Brass
For wood, aluminum, & vinyl double
hung windows
Locks & unlocks with key
Cam action draws windows together to prevent drafts
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$10.09
SKU: 2038-PB
Finishes: Polished Brass
Material: Solid Brass
Strengthens and repairs damaged doors
Assists in preventing forced entry
Dimensions: 3” x 4-1/4”
Backset: 2-3/4”
Door Thickness: 1-3/4”
$12.39
SKU: 2020-PB, 2020-VB
Finishes: Polished Brass
Repairs damaged doors
Assists in preventing forced entry
Dimensions: 1” x 4-1/2”
Door Thickness: 1-3/4”
$8.29
SKU:1328
Finish: Polished Brass
Clip Style
3 cams included to fit most applications
5-pin tumbler
Key Blank: Import Mailbox Blank HL1-M
Instructions:
Use a locking cam that matches your old lock.
1. Remove old mailbox lock by removing rear nut behind locking bar. Then remove locking cam and large nut behind door face.
2. Install new lock using reverse procedure from step #1.
$6.69
SKU: 1321
Finish: Polished Brass
Easy to install replacement
Brass plated steel
Key cylinder is offset from center
5/16” Bolt
Instructions:
1. Remove old mailbox lock by removing screw.
2. Position lock on mailbox and re-install screws.
$4.39
SKU: 1281-601
Finish: Polished Brass
Keyed locking for maximum security
Requires 3/4” mounting hole
For wood or metal door or drawer
2 washers for 90 or 180 degree rotation
Max drawer thickness 3/4”
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$6.79
SKU: 1143
Finish: Polished Brass
For old style passage locks
Dimensions: 2-1/2” diameter roses
Spindle size: 7mm
Fits up to 1-1/2″ diameter bore
Instructions:
1. Remove old hardware from door.
2. Attach new roses with screws provided.
3. Twist one knob onto spindle and slide through door hole while attaching to rose.
4. Twist last knob onto spindle and rose. Tighten knows using small screws on the side of knobs.
$14.39
SKU: 1050
Finish: Polished Brass
1/4” adjustment for tight fit of door to frame
Stops door rattle
Assures engagement of dead latch function
Residential or commercial frames
Dimensions: 1-1/4” x 4-7/8”
Door Thickness: All
Instructions:
Before starting first check door thickness for proper template alignment and then follow installation instructions.
-If door thickness is 1-3/4″ place template on from 3/16″ from door jamb.
-If door thickness is 1-3/8″ place template on the door jamb.
1. Remove old strike.
2. Center template with latch hole and tape in place.
3. Position new strike in place and mark two holes. Chisel out area behind strike if needed or a flush fit is desired.
4. Drill 1/8″ pilot holes 2″ deep. Adjust to fit door.
$5.69
SKU: 1047
Finish: Polished Brass
2-1/2” extended lip
1/4” adjustment for tight fit of door to frame
Stops door rattle
Assures engagement of dead latch function
Use on wood frames
Door Thickness: All
Dimensions: 2-3/4″ x 3″
$5.99
SKU: 1016-PB
Finish: Polished Brass
Replaces most deadbolt strikes for increased security
Strengthens or repairs wood jambs
3” screws attach to wall stud for increased security
Dimensions: 1-5/8” x 11”
Door Thickness: 1-3/4″ or thicker
Instructions:
1. Remove old strike.
2. Position new strike in place and mark the two mounting holes on the side of the strike away from the door jamb. Chisel out area behind strike if needed or if a flush fit is desired.
3. Drill 1/8″ pilot holes 1″ deep. Install small screws.
4. Close door and operate lock. If lock operates correctly, drill remaining two pilot holes with a 1/8″ drill bit 2″ deep. Install long screws. If lock does not operate correctly, reposition strike plate and retest.
$7.19
SKU: 1150
Finish: Polished Brass
Zinc housing
5-pin tumbler lock
1-1/4″ bore hole required
Replacement lock cylinder for rim cylinder type lock sets
Key Blank: Weiser Blank WR5
Instructions:
1. Remove screws from old cylinder and remove cylinder.
2. Align connecting spindles of replacement cylinder to lock.
3. Insert screws into cylinder and tighten.
$7.89