SKU: 5140-604
Finish: Chrome
For interior or exterior use
Rotating bolt to prevent sawing
Locks in closed or vented position
Non-removable screws
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$29.99
SKU: 2000-PB
Finish: Polished Brass
Material: Solid Brass
Repairs damaged doors
Assists in preventing forced entry
Dimensions: 1” x 4-1/2”
Door Thickness: 1-3/8”
$10.09
SKU: 1862
Finish: Vintage Bronze
Secures door while allowing opening for
viewing or ventilation
Solid Brass material with steel chain
Easy to install
Instructions:
1. Mount long plate 1/4″ from edge of door at convenient height. Large hole at end of slot faces away from door jamb. Install 4 screws. (Drill 3/32″ pilot holes if necessary.)
2. Mount chain holder on door jamb so that knob on chain will reach hole in slide plate.
$10.19
SKU:1848
Finish: Polished Brass
For flush or recessed doors
Bolt surface mounts to face of door
2 keepers allow for surface or mortise
frame installation
Guide brackets adjust fit unique
installation conditions
$8.59
SKU:1846
Finish: Chrome
Ideal for hotel/motel doors & drawers
Provides extra security to almost any
door
Locks & unlocks from inside with key
Uses door strike opening for mount point
Hook to catch strike plate on door or lip of cabinet
Instructions:
1. Using key, unlock travel lock and slide out locking bar.
2. Open door or drawer and hook locking bar into strike plate or onto inside lip of cabinet.
3. Close door or drawer and slide locking plate onto bar either horizontally or vertically as desired.
4. Slide lock onto locking bar tight against locking plate. Use key to lock and unlock.
$18.99
SKU: 1503
Finish: Polished Brass
Material: Solid Brass
For double-hung windows
Cam action draws windows together to
prevent drafts
Provides strong security barrier against intruders
$20.99
SKU: 1421
Finish: Polished Brass
Locks in closed or vented position
Locks & unlocks with key
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$6.77
SKU: 1419
Finish: Polished Brass
Uses special key for lock removal
Removal key is needed to unlock
Resists tampering if glass is broken
Recommended for wood windows only
Caution: Locks are designed primarily for use while occupants are away. If used with occupants present, proper precautions should be taken for fire escapes. Keep key readily available.
Instructions:
1. Close window.
2. Drill 5/8″ diameter. X 1/4″ deep in lower sash.
3. Drill 1/4″ diameter. 2″ deep.
4. Place bolt through cup washer and tighten.
5. Back out bolt until added security is needed.
$11.49
SKU: 1400
Finish: Polished Brass
For wood, aluminum, & vinyl double
hung windows
Locks & unlocks with key
Cam action draws windows together to prevent drafts
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$10.09
SKU: 2038-PB
Finishes: Polished Brass
Material: Solid Brass
Strengthens and repairs damaged doors
Assists in preventing forced entry
Dimensions: 3” x 4-1/4”
Backset: 2-3/4”
Door Thickness: 1-3/4”
$15.09
SKU: 2020-PB
Finishes: Polished Brass
Repairs damaged doors
Assists in preventing forced entry
Dimensions: 1” x 4-1/2”
Door Thickness: 1-3/4”
$10.99
SKU: 1378-604
Finish: Chrome
Keyed locking for maximum security
Requires 3/4” mounting hole
For wood or metal door or drawer
2 washers for 90 or 180 degree rotation
Max drawer thickness 1/2”
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$9.19
SKU: 1321
Finish: Polished Brass
Easy to install replacement
Brass plated steel
Key cylinder is offset from center
5/16” Bolt
Instructions:
1. Remove old mailbox lock by removing screw.
2. Position lock on mailbox and re-install screws.
$5.89
SKU: 1281-601
Finish: Polished Brass
Keyed locking for maximum security
Requires 3/4” mounting hole
For wood or metal door or drawer
2 washers for 90 or 180 degree rotation
Max drawer thickness 3/4”
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$11.39
SKU: 1143
Finish: Polished Brass
For old style passage locks
Dimensions: 2-1/2” diameter roses
Spindle size: 7mm
Fits up to 1-1/2″ diameter bore
Instructions:
1. Remove old hardware from door.
2. Attach new roses with screws provided.
3. Twist one knob onto spindle and slide through door hole while attaching to rose.
4. Twist last knob onto spindle and rose. Tighten knows using small screws on the side of knobs.
$27.99
SKU: 1050
Finish: Polished Brass
1/4” adjustment for tight fit of door to frame
Stops door rattle
Assures engagement of dead latch function
Residential or commercial frames
Dimensions: 1-1/4” x 4-7/8”
Door Thickness: All
Instructions:
Before starting first check door thickness for proper template alignment and then follow installation instructions.
-If door thickness is 1-3/4″ place template on from 3/16″ from door jamb.
-If door thickness is 1-3/8″ place template on the door jamb.
1. Remove old strike.
2. Center template with latch hole and tape in place.
3. Position new strike in place and mark two holes. Chisel out area behind strike if needed or a flush fit is desired.
4. Drill 1/8″ pilot holes 2″ deep. Adjust to fit door.
$7.49
SKU: 1047
Finish: Polished Brass
2-1/2” extended lip
1/4” adjustment for tight fit of door to frame
Stops door rattle
Assures engagement of dead latch function
Use on wood frames
Door Thickness: All
Dimensions: 2-3/4″ x 3″
$7.39
SKU: 1016-PB
Finish: Polished Brass
Replaces most deadbolt strikes for increased security
Strengthens or repairs wood jambs
3” screws attach to wall stud for increased security
Dimensions: 1-5/8” x 11”
Door Thickness: 1-3/4″ or thicker
Instructions:
1. Remove old strike.
2. Position new strike in place and mark the two mounting holes on the side of the strike away from the door jamb. Chisel out area behind strike if needed or if a flush fit is desired.
3. Drill 1/8″ pilot holes 1″ deep. Install small screws.
4. Close door and operate lock. If lock operates correctly, drill remaining two pilot holes with a 1/8″ drill bit 2″ deep. Install long screws. If lock does not operate correctly, reposition strike plate and retest.
$8.69