SKU: 5141
Finish: White
For interior or exterior use
Rotating bolt to prevent sawing
Locks in closed or vented position
Non-removable screws
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$29.99
SKU: 5140-604
Finish: Chrome
For interior or exterior use
Rotating bolt to prevent sawing
Locks in closed or vented position
Non-removable screws
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$29.99
SKU: 1979
Finish: White
Spring loaded, slide-in action securely locks door in closed or vented position.
Prevents lifting or sliding of door
Easy to install
$6.49
SKU: 1443
Finish: White
For double-hung windows
Cam action draws windows together to
prevent drafts
Provides strong security barrier against intruders
$5.99
SKU: 1433
Finish: White
Rim mortise & surface strikes included
3 different keepers for special mounting
applications
For use on old style casement windows
$7.49
SKU: 1428
Finish: White
Cam action provides tight closure
For aluminum, vinyl, or wood double hung
windows
Secondary lever must be activated to
allow opening
$7.99
SKU: 1425-601
Finish: Gray
Locks in closed or vented position
Locks & unlocks with key
Comes with 2 inserts (not shown)
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$6.77
SKU: 1404-601
Finish: White
For wood, aluminum, & vinyl double
hung windows
Locks & unlocks with key
Cam action draws windows together to prevent drafts
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$13.99
SKU: 1277
Finish: White
For home & travel
Easy to use
Installs in seconds
Secures your door from an unwanted
entry
Heavy gauge steel construction
Instructions:
1. Align arrow on fork with holes in bottom section.
2. Adjust guard to proper height of door handle. To secure length, rotate inner section until pin pop up through hole in outer section.
3. Place forked end under door handle and set guard foot 10-12″ from bottom of door. Lightly tap end with your foot toward door to secure.
4. To remove: A light tap of foot against door guard away from door will loosen guard.
$29.99
SKU: 5140
Finish: Chrome
For interior or exterior use
Rotating bolt to prevent sawing
Locks in closed or vented position
Non-removable screws
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$29.99
SKU: 1940
Finish: White
Cam action lock
Locks windows in closed or vented position
Instructions:
1. Place lock on track against window frame.
2. Press down on lever to lock.
3. For loose fitting doors, it may be necessary to place lock inside top track. Press on lever to lock.
$6.49
SKU: 1425
Finish: Gray
Locks in closed or vented position
Locks & unlocks with key
Comes with 2 inserts (not shown)
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$15.69
SKU: 1411
Finish: White
Comes in pack of two
Locks window in closed or vented position
For use on sliding windows
Extruded aluminum with steel thumbscrew
Instructions:
To Lock:
1. Close window securely.
2. Plack lock against edge of sliding window on bottom track and tighten thumb screw.
To Vent:
1. Open sliding window 1-1/2″ to 2″. Place lock against edge of sliding window on bottom track and tighten thumb screw.
$5.79
SKU: 1407
Finish: Chrome
Mounts on vertical track
Locks in closed or vented position
Flips away to allow window to open
Instructions:
1. Close window and attach lock three to four inches above top of lower sash with nails enclosed.
2. Swing stop closed to engage window stop, preventing window from being raised past window stop.
$5.79
SKU: 1404
Finish: White
For wood, aluminum, & vinyl double hung windows
Locks & unlocks with key
Cam action draws windows together to prevent drafts
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$13.99