$29.99
SKU: 1277
Finish: White
For home & travel
Easy to use
Installs in seconds
Secures your door from an unwanted
entry
Heavy gauge steel construction
Instructions:
1. Align arrow on fork with holes in bottom section.
2. Adjust guard to proper height of door handle. To secure length, rotate inner section until pin pop up through hole in outer section.
3. Place forked end under door handle and set guard foot 10-12″ from bottom of door. Lightly tap end with your foot toward door to secure.
4. To remove: A light tap of foot against door guard away from door will loosen guard.
In stock
Add to Compare
SKU: 1941
Finish: Aluminum
Cam action lock
Locks windows in closed or vented position
Instructions:
1. Place lock on track against window frame.
2. Press down on lever to lock.
3. For loose fitting doors, it may be necessary to place lock inside top track. Press on lever to lock.
$6.49
SKU: 1503
Finish: Polished Brass
Material: Solid Brass
For double-hung windows
Cam action draws windows together to
prevent drafts
Provides strong security barrier against intruders
$20.99
SKU: 1443
Finish: White
For double-hung windows
Cam action draws windows together to
prevent drafts
Provides strong security barrier against intruders
$5.99
SKU: 1253
Finish: Aluminum Tone
Securely locks in closed or vented position
Assembled with hardened steel bolt
Easily activated with foot
Locks and unlocks with key
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
Instructions:
CAUTION: Before installation, check with patio door manufacturer for door specifications. Failure to do so may result in glass breakage!
1. Close sliding door completely.
2. With bolt retracted, place lock in desired position at top or bottom of leading edge of sliding door, leaving enough room to clear track so door slides smoothly.
3. Tap back of lock lightly with hammer to mark bolt hole position; remove lock. Make sure drill will clear glass. Drill 1-1/32″ diameter hole for locking bolt.
4. With bolt extended, position lock and slide bolt into hole. mark screw holes, remove lock and drill 1/8″ diameter holes.
5. Replace lock; install with standard screws and tighten. Or, to make door tamper-proof, remove standard screws and replace with non-removable screws.
$13.79
SKU: 1418
Finish: Polished Brass
Mounts on vertical track
Locks in closed or vented position
Flips away to allow window to open
Instructions:
1. Close window and attach lock 3″ to 4″ above top of lower sash with nails enclosed.
2. Swing stop closed to engage window stop, preventing window from being raised past window stop.
$5.79
