SKU: 5140-604
Finish: Chrome
For interior or exterior use
Rotating bolt to prevent sawing
Locks in closed or vented position
Non-removable screws
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$29.99
SKU: 1862
Finish: Vintage Bronze
Secures door while allowing opening for
viewing or ventilation
Solid Brass material with steel chain
Easy to install
Instructions:
1. Mount long plate 1/4″ from edge of door at convenient height. Large hole at end of slot faces away from door jamb. Install 4 screws. (Drill 3/32″ pilot holes if necessary.)
2. Mount chain holder on door jamb so that knob on chain will reach hole in slide plate.
$10.19
SKU:1846
Finish: Chrome
Ideal for hotel/motel doors & drawers
Provides extra security to almost any
door
Locks & unlocks from inside with key
Uses door strike opening for mount point
Hook to catch strike plate on door or lip of cabinet
Instructions:
1. Using key, unlock travel lock and slide out locking bar.
2. Open door or drawer and hook locking bar into strike plate or onto inside lip of cabinet.
3. Close door or drawer and slide locking plate onto bar either horizontally or vertically as desired.
4. Slide lock onto locking bar tight against locking plate. Use key to lock and unlock.
$18.99
SKU: 1378-604
Finish: Chrome
Keyed locking for maximum security
Requires 3/4” mounting hole
For wood or metal door or drawer
2 washers for 90 or 180 degree rotation
Max drawer thickness 1/2”
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$9.19
SKU: 1306
Finish: Chrome
Chrome-plated steel
Ideal for cabinets & cases with sliding glass doors
Adjustable length for many alignments
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
Instructions:
1. Slide outside door to open position. Place lock on inside door as shown and tighten screw. To avoid breaking glass, do not over-tighten.
2. Close sliding doors completely.
3. Slide lock over notched locking plate, fitting the flat side against outside door edge.
$7.59
SKU: 1381-604
Finish: Chrome
Keyed locking for maximum security
Requires 3/4″ mounting hole
For wood or metal door or drawer
2 washers for 90 or 180 degree rotation
Max drawer thickness 3/4″
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$9.19
SKU: 1381-601
Finish: Chrome
Keyed locking for maximum security
Requires 3/4″ mounting hole
For wood or metal door or drawer
2 washers for 90 or 180 degree rotation
Max drawer thickness 3/4″
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$9.19
SKU: 5140
Finish: Chrome
For interior or exterior use
Rotating bolt to prevent sawing
Locks in closed or vented position
Non-removable screws
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$29.99
SKU: 3708-601
Finish: Chrome
Locks without key
Concealed screws
Rust resistant
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$20.89
SKU: 3708
Finish: Chrome
Locks without key
Concealed screws
Rust resistant
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$20.89
SKU:2258-PB, 2258-SS
Finishes: Stainless Steel & Polished Brass
Material: Solid Brass (PB only)
Strengthens and repairs damaged doors
Assists in preventing forced entry
Dimensions: 4-1/4″ x 9″
Backset: 2-3/4″
Door Thickness: 1-3/4″
Center to center: 5-1/2″
$46.49
SKU: 2051-SS, 2051-PB, 2051-SSS, 2051-VB
Finish: Stainless Steel, Polished Brass, Solid Stainless Steel & Vintage Bronze
Material: Solid Brass (SS, PB, VB) Solid Stainless Steel (SSS)
Strengthens and repairs damaged doors
Assists in preventing forced entry
Dimensions: 4″ x 4-1/2″
Backset: 2-3/8″
Door Thickness: 1-3/8″
Instructions:
1. Remove old lockset and latch screws (but not latch) and slide unit over door.
2. Push unit flush against edge of door. Replace latch screw with furnished long screws.
3. Drill pilot holes with 1/8″ bit 3/4″ deep and install 4 short mounting screws.
4. Install lockset.
Note: For tight fitting doors: If unit hits jamb when closing, remove and cut out 1/32″ on door edge so unit fits flush.
$10.61 – $21.99
SKU: 2001-SSS, 2001-VB
Finishes: Solid Stainless Steel & Vintage Bronze
Material: Solid Brass (VB) Solid Stainless Steel (SSS)
Strengthens and repairs damaged doors
Assists in preventing forced entry
Dimensions: 4″ x 9″
Backset: 2-3/8″
Door Thickness: 1-3/8″
Instructions:
1. Remove old lockset and latch screws, (but not latch) and slide unit over door.
2. Push unit flush against edge of door. Replace latch screw with furnished long screws.
3. Drill pilot holes with 1/8″ bit 3/4″ deep and install 4 shirt mounting screws.
4. Install lockset.
For tight fitting doors: If unit hits jamb when closing, remove and cut out 1/32″ on door edge so unit fits flush.
$43.99
SKU: 1870, 1870-SN
Finishes: Satin Nickel & Polished Brass
Secures door while allowing opening for viewing or ventilation
Steel chain
Easy to install
Instructions:
1. Mount long plate 1/4″ from edge of door at convenient height. Large hole at end of slot faces away from door jamb. Install 4 screws. (Drill 3/32″ pilot holes if necessary.)
2. Mount chain holder on door jamb so that knob on chain will reach hole in slide plate
$8.79
SKU: 1853, 1853-SN
Finishes: Polished Brass & Satin Nickel
Includes keeper for surface mount
Easy to install
Instructions:
1. Position bolt plate on door at desired location and mark screw holes. Drill 3/32″ diameter pilot holes 1/2″ deep and fasten bolt plate to door with screws.
2. Position strike plate on door jamb over bolt, making sure bolt will slide into strike properly with bolt extended. mark screw hole locations. Drill 3/32″ diameter pilot holes 1/2″ deep and fasten strike plate to jamb with screws.
$11.99
SKU: 1849, 1849-SN
Finishes: Polished Brass & Satin Nickel
For flush or recessed doors
Bolts surface mounts to face of door
2 keepers allow for surface or mortise frame installation
Instructions:
1. Position bolt at desired point on door and mark location of screws.
2. Close door and extend bolt. Mark position of bolt on door frame.
3. Use bolt mark on door frame fro strike placement. Two types of strikes are provided; use appropriate strike for door type, recessed or flush. Mark screw holes and fasten strike in place with screws.
$15.99
SKU: 1847, 1847-SN
Finishes: Polished Brass & Satin Nickel
Material: Solid Brass
For flush or recessed doors
Bolt surface mounts to face of door
2 keepers allow for surface or mortise frame installation
Instructions:
1. Position bolt at desired point on door and mark location of screws.
2. Close door and extend bolt. Mark position of bolt on door frame.
3. Use bolt mark on door frame for strike placement. Two types of strikes are provided; use appropriate strike for door type, recessed or flush. Mark screw holes and fasten strike in place with screws.
$13.99
SKU: 1843
Finish: White
Locks or unlocks with flip action
No mortising required
Easy to install privacy lock
Instructions:
1. Position swing lock on the frame of the door at a convenient height. The lip should be curved towards the door frame.
2. Drill 3/32″ pilot holes 1/2″ deep and install large screws.
$4.49 – $4.59