SKU: 1278-604
Polished Brass
Keyed locking for maximum security
Requires 3/4” mounting hole
For wood or metal door or drawer
2 washers for 90 or 180 degree rotation
Max drawer thickness 1/2″
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$6.59
SKU: 1355-645
Finishes: Polished Brass
Requires 7/8” mounting hole
Max cabinet or drawer thickness 3/4”
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$5.79
SKU:1353
Finish: Polished Brass
Requires 7/8” mounting hole
Includes strike plate
Max drawer thickness 7/8”
Key Blank: RV & Camper Blank CH751
Instructions:
1. Drill 7/8″ hole form front to inside of door. Hole should be 3/4″ from door edge.
2. Install lock with screws provided.
3. Locate strike position.
4. Mortise out surface and mount strike.
$6.69
SKU:1328
Finish: Polished Brass
Clip Style
3 cams included to fit most applications
5-pin tumbler
Key Blank: Import Mailbox Blank HL1-M
Instructions:
Use a locking cam that matches your old lock.
1. Remove old mailbox lock by removing rear nut behind locking bar. Then remove locking cam and large nut behind door face.
2. Install new lock using reverse procedure from step #1.
$6.69
SKU: 1321
Finish: Polished Brass
Easy to install replacement
Brass plated steel
Key cylinder is offset from center
5/16” Bolt
Instructions:
1. Remove old mailbox lock by removing screw.
2. Position lock on mailbox and re-install screws.
$4.39
SKU: 1281-601
Finish: Polished Brass
Keyed locking for maximum security
Requires 3/4” mounting hole
For wood or metal door or drawer
2 washers for 90 or 180 degree rotation
Max drawer thickness 3/4”
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$6.79
SKU: 1258-601
Finish: Polished Brass
Keyed locking for maximum security
Requires 3/4” mounting hole
For wood or metal door or drawer
2 washers for 90 or 180 degree rotation
Max drawer thickness 1/4”
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$6.49
SKU: 1356, 1356-VB
Finishes: Polished Brass & Vintage Bronze
Requires 7/8″ mounting hole
Max cabinet or drawer thickness 1-1/8″
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
Instructions:
1. Drill 7/8″ diameter hole for lock if necessary.
2. Push lock through hole form inside of drawer. Use lock for template to mark screw holes.
3. Drill small pilot holes 1/2″ deep and screw lock into position.
$6.79 – $7.69
SKU: 1355, 1355-VB
Finishes: Polished Brass & Vintage Bronze
Requires 7/8″ mounting hole
Max cabinet or drawer thickness 3/4″
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$5.79 – $6.49
SKU: 1327
Finish: Polished Brass
Easy to install
New or for replacement application
Hex nut threaded cylinder
3 cams included to fit most applications
5-pin tumbler
Key Blank: Import Mailbox Blank HL1-M
Instructions:
Use a locking cam that matches your old lock.
1. Remove old mailbox lock by removing rear nut behind locking bar. Then remove locking cam and large nut behind door face.
2. Install new lock using reverse procedure form step #1.
$10.09
SKU: 1319
Finish: Polished Brass
Easy to install
New or for replacement application
Versatile – Can be installed with screws or
by turning wing clips
1/4″ Bolt
Instructions:
1. Remove old mailbox lock by removing screw.
2. Position lock on mailbox and re-install screws.
$3.79
SKU: 1281
Finish: Polished Brass
Keyed locking for maximum security
Requires 3/4″ mounting hole
For wood or metal door or drawer
2 washers for 90 or 180 degree rotation
Max drawer thickness 3/4″
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$6.79
SKU: 1278
Finish: Polished Brass
Keyed locking for maximum security
Requires 3/4″ mounting hole
For wood or metal door or drawer
2 washers for 90 or 180 degree rotation
Max drawer thickness 1/2″
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$6.59
SKU: 1258
Finish: Polished Brass
Keyed locking for maximum security
Requires 3/4″ mounting hole
For wood or metal door or drawer
2 washers for 90 or 180 degree rotation
Max drawer thickness 1/4″
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
Instructions:
1. Mount template to door or drawer.
2. Remove cam from lock. Drill 3/4″ diameter hole.
3. Place collar onto lock and insert lock into hole.
4. Place spur washer (for wood only) to lock.
5. Place 3/4″ nut tightly.
6. Place 90 to 180 rotation washer, whichever is preferred.
7. Place cam (either straight or bent, whichever suits conditions better). Adjust cam by bending it slightly.
8. Fasten lock with lock washer and screw.
$6.49