$10.49
SKU: 1355, 1355-VB
Finishes: Polished Brass & Vintage Bronze
Requires 7/8″ mounting hole
Max cabinet or drawer thickness 3/4″
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
Proposition 65 Warning
SKU: 1027
Finish: Polished Brass
For locks with 5-1/2″ to 6″ centers
Replaces standard latch & deadbolt
strikes with one piece security
Strengthens or repairs wood jambs
3″ screws attach to wall stud for extra security
Dimensions: 1-5/8″ x 11″
Door Thickness: 1-3/4″ or thicker doors
Instructions:
1. Remove old strike
2. Position new strike in place and mark with a pencil the three mounting holes on the side of the strike away from the door jamb. Chisel out area behind strike if needed or a flush fit is desired.
3. Drill 1/8″ pilot holes 1″ deep. Install short screws.
4. Close door and operate lock. If lock operates correctly, drill remaining two pilot holes with a 1/8″ drill bit 2″ deep. Install long screws. If lock does not operate correctly, reposition strike plate and retest.
Note: Check distance between door and frame when door is closed.
– If the gap is 1/4″ or more install strike on surface of frame.
– If the gap is less than a 1/4″ strike must be chiseled into the frame.
$14.99
SKU: 1038
Finish: Stainless Steel
Use on wood or metal jambs
Works with most commercial Grade 1 lock sets
Dimensions: 1-1/4″ x 4-7/8″
Door Thickness: All
Instructions:
1. Remove old strike
2. Place strike on jamb, centered over latch hole.
3. Mark outline of strike on door jamb.
4. Using chisel, cut out area for strike 1/16″ deep.
5. Install screws.
$8.09
SKU: 1356, 1356-VB
Finishes: Polished Brass & Vintage Bronze
Requires 7/8″ mounting hole
Max cabinet or drawer thickness 1-1/8″
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
Instructions:
1. Drill 7/8″ diameter hole for lock if necessary.
2. Push lock through hole form inside of drawer. Use lock for template to mark screw holes.
3. Drill small pilot holes 1/2″ deep and screw lock into position.
$10.49
SKU: 3708-601
Finish: Chrome
Locks without key
Concealed screws
Rust resistant
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
$20.89
SKU: 1063, 1064, 1065, 1065-SN, 1066
Finishes: Vintage Bronze, Antique Brass, Polished Brass, Satin Nickel & Chrome
Fits Standard size doors
Steel strike plate with adjustable tab
Replaces most residential exterior & interior strikes
Dimensions: 1-3/8″ x 2-1/4″
Door Thickness: All
Instructions:
1. Remove old strike.
2. Place new strike on door jamb, centered with latch hole.
3. Install screws provided and adjust tab with screw driver for proper fit.
$4.49 – $5.09
