$9.99
SKU: 1408
Finish: Aluminum
Extruded aluminum with no-mar vinyl inserts to protect track
Locks window in closed or vented position
Fits wide & narrow type tracks
For use on sliding windows
Instructions:
To Lock:
1. Close window securely.
2. Placke lock against edge of sliding window on bottom track and turn wing clockwise until wedge is tight.
To Vent:
1. Open sliding window 1-1/2″ to 2″. Place lock against edge of sliding window on bottom track and turn wing nut clockwise until wedge is tight.
SKU: 1275
Finish: Aluminum
For sliding door opening 28″- 52″
Telescoping aluminum locking bar
No cutting needed
Easy installation
Instructions:
To install inside sliding door:
1. Place rotating bracket on wall next to stationary door.
2. Mark and drill 1/8″ diameter holes and attach bracket to wall with screws provided.
3. With other end of bar in locking saddle, extend bar to inside edge of sliding door. Hold in horizontal position and mark and drill 1/8″ holes. Install screws through saddle catch into door.
To install outside sliding door:
1. Install jamb and bracket against inside edge of non-moving door.
2. Locking saddle install on inside frame of moveable door. Caution: Care must be taken that locking saddle is positioned at least 2″ above the sliding door handle.
$19.99
SKU: 1430
Finish: Polished Brass
Mounts onto the edge of the upper window
Sliding stud stops opening at desired location
Flips away to allow window to open
Allows ventilation but prevents entry
Easy to install
Instructions:
1. Open window to desired height (not more than 4″ to 6″)
2. Position lock on inside edge of upper window as shown. Mark hole centers and drill small pilot holes. Install lock with screws provided.
3. Slide spring-loaded contact around to inside (closed) position.
4. Raise lower window (or lower upper window) observing where contact hits lower window frame. Mark center of that point. Install furnished strike plate.
$9.99
SKU: 1940
Finish: White
Cam action lock
Locks windows in closed or vented position
Instructions:
1. Place lock on track against window frame.
2. Press down on lever to lock.
3. For loose fitting doors, it may be necessary to place lock inside top track. Press on lever to lock.
$8.99
SKU: 1277
Finish: White
For home & travel
Easy to use
Installs in seconds
Secures your door from an unwanted
entry
Heavy gauge steel construction
Instructions:
1. Align arrow on fork with holes in bottom section.
2. Adjust guard to proper height of door handle. To secure length, rotate inner section until pin pop up through hole in outer section.
3. Place forked end under door handle and set guard foot 10-12″ from bottom of door. Lightly tap end with your foot toward door to secure.
4. To remove: A light tap of foot against door guard away from door will loosen guard.
$50.99
