For wood, aluminum, & vinyl double
Locks & unlocks with key
Cam action draws windows together to prevent drafts
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
Finish: Polished Brass
Uses special key for lock removal
Removal key is needed to unlock
Resists tampering if glass is broken
Recommended for wood windows only
Caution: Locks are designed primarily for use while occupants are away. If used with occupants present, proper precautions should be taken for fire escapes. Keep key readily available.
1. Close window.
2. Drill 5/8″ diameter. X 1/4″ deep in lower sash.
3. Drill 1/4″ diameter. 2″ deep.
4. Place bolt through cup washer and tighten.
5. Back out bolt until added security is needed.
For sliding door opening 28″- 52″
Telescoping aluminum locking bar
No cutting needed
To install inside sliding door:
1. Place rotating bracket on wall next to stationary door.
2. Mark and drill 1/8″ diameter holes and attach bracket to wall with screws provided.
3. With other end of bar in locking saddle, extend bar to inside edge of sliding door. Hold in horizontal position and mark and drill 1/8″ holes. Install screws through saddle catch into door.
To install outside sliding door:
1. Install jamb and bracket against inside edge of non-moving door.
2. Locking saddle install on inside frame of moveable door. Caution: Care must be taken that locking saddle is positioned at least 2″ above the sliding door handle.
Cam action lock
Locks windows in closed or vented position
1. Place lock on track against window frame.
2. Press down on lever to lock.
3. For loose fitting doors, it may be necessary to place lock inside top track. Press on lever to lock.