SKU: 1873, 1873-SN, 1873-VB
Finishes: Polished Brass, Satin Nickel & Vintage Bronze
Secures door while allowing 2” opening
for viewing or ventilation
Pin provides added security
$13.39 – $20.59
SKU: 1855, 1855-SN
Finishes: Polished Brass & Satin Nickel
Material: Solid Brass
For use on French style doors
Requires cutout in door for installation
Easy slide lock action
$20.59 – $22.69
SKU: 1181, 1181-SN, 1181-VB
Finishes: Polished Brass, Satin Nickel & Vintage Bronze
Adds security to almost any door
Requires 9/16” hole in door edge
$10.29 – $12.39
SKU: 1875, 1875-SN
Finishes: Polished Brass & Satin Nickel
Secures door while allowing 2″ opening for viewing or ventilation
Easy to install
Instructions:
1. Mount long plate 1/4″ from edge of door at convenient height. Large hole at end of slot faces away from door jamb. Install 4 screws. (Drill 1/16″ pilot holes if necessary.)
2. Mount chain holder on door jamb so that knob on chain will reach hole in the slide plate.
3. Slide chain shortener into slot.
4. Place closest link on chain shortener for added protection.
$6.79 – $8.79
SKU: 1870, 1870-SN
Finishes: Satin Nickel & Polished Brass
Secures door while allowing opening for viewing or ventilation
Steel chain
Easy to install
Instructions:
1. Mount long plate 1/4″ from edge of door at convenient height. Large hole at end of slot faces away from door jamb. Install 4 screws. (Drill 3/32″ pilot holes if necessary.)
2. Mount chain holder on door jamb so that knob on chain will reach hole in slide plate
$5.79
SKU: 1860, 1860-SN, 1860-W
Finishes: Polished Brass, Satin Nickel & White
Secures door while allowing opening for viewing or ventilation
Solid Brass material with steel chain
Easy to install
Instructions:
1. Mount long plate 1/4″ from edge of door at convenient height. Large hole at end of slot faces away from door jamb. Install 4 screws. (Drill 3/32″ pilot holes if necessary.)
2. Mount chain holder on door jamb so that knob on chain will reach hole in slide plate.
$7.89
SKU: 1853, 1853-SN
Finishes: Polished Brass & Satin Nickel
Includes keeper for surface mount
Easy to install
Instructions:
1. Position bolt plate on door at desired location and mark screw holes. Drill 3/32″ diameter pilot holes 1/2″ deep and fasten bolt plate to door with screws.
2. Position strike plate on door jamb over bolt, making sure bolt will slide into strike properly with bolt extended. mark screw hole locations. Drill 3/32″ diameter pilot holes 1/2″ deep and fasten strike plate to jamb with screws.
$7.99
SKU: 1851, 1851-SN
Finishes: Polished Brass and Satin Nickel
Material: Solid Brass
For flush or recessed doors
Bolt surface mounts to face of door
2 keepers allow for surface or mortise frame installation
Instructions:
1. Position bolt at desired point on door and mark location of screws.
2. Close door and extend bolt. Mark position of bolt on door frame.
3. Use bolt mark on door frame for strike placement. Two types of strikes are provided; use appropriate strike for door type, recessed or flush. Mark screw holes and fasten strike in place with screws.
$9.29
SKU: 1849, 1849-SN
Finishes: Polished Brass & Satin Nickel
For flush or recessed doors
Bolts surface mounts to face of door
2 keepers allow for surface or mortise frame installation
Instructions:
1. Position bolt at desired point on door and mark location of screws.
2. Close door and extend bolt. Mark position of bolt on door frame.
3. Use bolt mark on door frame fro strike placement. Two types of strikes are provided; use appropriate strike for door type, recessed or flush. Mark screw holes and fasten strike in place with screws.
$7.99
SKU: 1847, 1847-SN
Finishes: Polished Brass & Satin Nickel
Material: Solid Brass
For flush or recessed doors
Bolt surface mounts to face of door
2 keepers allow for surface or mortise frame installation
Instructions:
1. Position bolt at desired point on door and mark location of screws.
2. Close door and extend bolt. Mark position of bolt on door frame.
3. Use bolt mark on door frame for strike placement. Two types of strikes are provided; use appropriate strike for door type, recessed or flush. Mark screw holes and fasten strike in place with screws.
$8.09
SKU: 1843
Finish: White
Locks or unlocks with flip action
No mortising required
Easy to install privacy lock
Instructions:
1. Position swing lock on the frame of the door at a convenient height. The lip should be curved towards the door frame.
2. Drill 3/32″ pilot holes 1/2″ deep and install large screws.
$2.79 – $2.89
SKU: 1110, 1110-SN
Finish: Brass Tone & Satin Nickel
5-pin tumbler with hardened steel pins
1-1/4″ bore required
Door Thickness: 1-3/8″ to 2-1/4″
Key Blank: Weiser Blank WR2/WR3
Instructions:
1. At desired height bore the hole for the cylinder 1-1/4″ dimeter, with center at a distance of 2-3/8″ from edge of door.
2. Insert cylinder and ring from the outside of door and place back plate on inside of door. Connect back plate to cylinder with two connecting screws. Cut screws to proper length relative to door thickness.
3. Cut off connecting bar so that it projects 3/8″ beyond inside of door.
4. Plack lock on door so that connecting bar enters slot. Mark holes. Remove lock and drill 1/8″ pilot holes. Attach lock to door by inserting screws through lock into door.
5. Plack strike plate on door jamb lower than centerline of lock to allow for any sag in door. Mark holes. Remove strike plate and drill 1/8″ pilot holes.
6. As needed, chisel (mortise) long lip into door jamb and leave short lip on surface.
$20.29 – $20.59