$8.09
SKU: 1358
Finish: Chrome
Keyed locking for maximum security
Requires 3/4″ mounting hole
For wood or metal door or drawer
2 washers for 90 or 180 degree rotation
Max drawer thickness 1/4″
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
SKU: 1378-604
Requires 3/4” mounting hole
Max drawer thickness 1/2”
$9.19
SKU: 1321
Finish: Polished Brass
Easy to install replacement
Brass plated steel
Key cylinder is offset from center
5/16” Bolt
Instructions: 1. Remove old mailbox lock by removing screw. 2. Position lock on mailbox and re-install screws.
$5.89
SKU: 1356, 1356-VB
Finishes: Polished Brass & Vintage Bronze
Requires 7/8″ mounting hole
Max cabinet or drawer thickness 1-1/8″
Instructions: 1. Drill 7/8″ diameter hole for lock if necessary. 2. Push lock through hole form inside of drawer. Use lock for template to mark screw holes. 3. Drill small pilot holes 1/2″ deep and screw lock into position.
$10.49
SKU: 1035, 1036
Finish: Polished Brass & Chrome
Fits standard size doors
Use on wood or metal jambs
Dimensions: 4-7/8″ long, 3-3/8″ lip
Door Thickness: All
Instructions: 1. Place strike on jamb, centered over latch hole. 2. Mark outline of strike on door jamb. 3. Using chisel, cut out area for strike 1/16″ deep. 4. Install screws.
$6.89
SKU: 1005
Mortising required
Screws at base of box strike secure to 2″ x 4″ framing for added security
Dimensions: 1-1/4″ x 4-7/8″
Instructions: 1. Mark center of bolt on frame. 2. Cut out template (see insert), locate center mark on template with center mark on frame. Tape in place. 3. Draw around outside of template. Mark 4 holes through template. Drill 1″ holes per template. 4. Chisel out between 1″ holes and fit strike box. 5. Chisel out 1/8″ deep for strike. 6. Install strike and faceplate with top and bottom screws. (Be sure 2 holes in strike box are toward center of frame.) 7. Drill two 1/8″ pilot holes at bottom of strike box toward center of frame and install screws at an angle.
$8.49