Finish: Polished Brass
Locks in closed or vented position
Non-removable screws included
Recommended for wood windows only
Locks & unlocks with key
Key Blank: Briggs & Stratton B1 & Yale Blank Y13
Finish: Aluminum Tone
Securely locks in closed or vented
Assembled with hardened steel bolt
Easily activated with foot
SKU: 1974, 1974-W
Finishes: Chrome & White
Twist action securely locks door in closed
or vented position
Prevents lifting or sliding of door
Easy to install
Comes in pack of two
Locks window in closed or vented position
For use on sliding windows
Extruded aluminum with steel thumbscrew
1. Close window securely.
2. Plack lock against edge of sliding window on bottom track and tighten thumb screw.
1. Open sliding window 1-1/2″ to 2″. Place lock against edge of sliding window on bottom track and tighten thumb screw.
For sliding door opening 28″- 52″
Telescoping aluminum locking bar
No cutting needed
To install inside sliding door:
1. Place rotating bracket on wall next to stationary door.
2. Mark and drill 1/8″ diameter holes and attach bracket to wall with screws provided.
3. With other end of bar in locking saddle, extend bar to inside edge of sliding door. Hold in horizontal position and mark and drill 1/8″ holes. Install screws through saddle catch into door.
To install outside sliding door:
1. Install jamb and bracket against inside edge of non-moving door.
2. Locking saddle install on inside frame of moveable door. Caution: Care must be taken that locking saddle is positioned at least 2″ above the sliding door handle.
Mounts on vertical track
Flips away to allow window to open
1. Close window and attach lock three to four inches above top of lower sash with nails enclosed.
2. Swing stop closed to engage window stop, preventing window from being raised past window stop.